英文文格式要求-turnitin查重

该文是参考文献专业参考文献论文范文，主要论述了参考文献类电大毕业论文,与英文文格式要求相关论文范文素材，适合参考文献及高质量及出版物方面的的大学硕士和本科毕业论文以及参考文献相关开题报告范文和职称论文写作参考文献资料下载。

Your Paper's Title Starts Here: Please Centeruse Helvetica (Arial) 14

FULL First Author1, a, FULL Second Author2,b and Last Author3,c

1Full address of first author, including country

2Full address of second author, including country

3List all distinct addresses in the same way

a, b, c

Keywords: List the keywords covered in your paper. These keywords will also be used by the publisher to produce a keyword index.

For the rest of the paper, please use Times Roman (Times New Roman) 12

Abstract. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text.

Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8x11 inches), with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). (We shall be able to publish your paper in electronic form on our web page scientific., if the paper format and the margins are correct. If not, we will he to scan your paper which, when pared with an electronic version, results in very poor quality)

Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

Introduction

All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper.

Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper.

Use italic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below).

Organization of the Text

Section Headings. The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph).

Page Numbers. Do not number your paper:

Tables. Tables (refer with: Table 1, Table 2, ...) should be presented as part of the text, but in such a way as to oid confusion with the text. A descriptive title should be placed above each table. Units in tables should be given in square brackets [meV]. If square brackets are not ailable, use curly {meV} or standard brackets (meV).

Special Signs. for example , α γ μ Ω () ≥ ± ● Γ {110} should always be written in with the fonts Times New Roman or Arial, especially also in the figures and tables.

Macros. Do not use any macros for the figures and tables. (We will not be able to convert such papers into our system)

Language. All text, figures and tables must be in English.

Figures. Figures (refer with: Fig.1, Fig.2, ...) also should be presented as part of the text, leing enough space so that the caption will not be confused with the text. The caption should be self-contained and placed below or beside the figure. Generally, only original drawings or photographic reproductions are acceptable. Only very good photocopies are acceptable. Utmost care must be taken to insert the figures in correct alignment with the text. Half-tone pictures should be in the form of glossy prints. If possible, please include your figures as graphic images in the electronic version. For best quality the pictures should he a resolution of 300 dpi(dots per inch).

Color figures are wele for the online version of the journal. Generally, these figures will be reduced to black and white for the print version. The author should indicate on the checklist if he wishes to he them printed in full color and make the necessary payments in advance.

Equations. Equations (refer with: Eq.1, Eq.2, ...) should be indented 5 mm (0.2"). There should be one line of space above the equation and one line of space below it before the text continues. The equations he to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. Equations should be punctuated as if they were an ordinary part of the text. Punctuation appears after the equation but before the equation number, e.g.

c2 等于 a2 + b2. (1)

Literature References

References are cited in the text just by square brackets [1]. (If square brackets are not ailable, slashes may be used instead, e.g. /2/.) Two or more references at a time may be put in one set of brackets [3,4]. The references are to be numbered in the order in which they are cited in the text and are to be listed at the end of the contribution under a heading References, see our example below.

Summary

If you follow the "checklist" your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.

References

[1]Dj.M. Maric, P.F. Meier and S.K. Estreicher: Mater. Sci. Forum Vol. 83-87 (1992), p. 119

[2]M.A. Green: High Efficiency Silicon Solar Cells (Trans Tech Publications, Switzerland 1987).

[3]Y. Mishing, in: Diffusion Processes in Advanced Technological Materials, edtied by D. Gupta Noyes Publications/William Andrew Publising, Norwich, NY (2004), in press.

[4]G. Henkelman, G.Johannesson and H. Jónsson, in: Theoretical Methods in Condencsed Phase Chemistry, edited by S.D. Schwartz, volume 5 of Progress in Theoretical Chemistry and Physics, chapter, 10, Kluwer Academic Publishers (2000).

[5]R.J. Ong, J.T. Dawley and P.G. Clem: submitted to Journal of Materials Research (2003)

[6]P.G. Clem, M. Rodriguez, J.A. Voigt and C.S. Ashley, U.S. Patent 6,231,666. (2001)

[7] Information on weld.labs.gov.

中文说明 (仅是对上述英文的翻译,具体版式仍能照上述英文)

论文标题居中

使用 Helvetica (Arial) 14号字体

第一作者全名,第二作者全名,第三作者

第一作者详细地址,包括国家

第二作者详细地址,包括国家

第三作者详细地址,包括国家

第一作者, 第二作者,第三作者

关键词 :列出您论文中的关键词 .这些关键词将被出版商用于创建关键词索引.

论文其他部分请使用Times Roman (Times New Roman) 12号字体

摘要 :此模板说明并展示如何提供可出版的论文.请您阅读以下说明并遵照提示进行排版.

请将您的文字处理软件设置为A4版式(21 x 29,7厘米或8 x 11英寸),边距为:底部1.5厘米(0.59英寸),顶部2.5厘米(0.98英寸),左/右间隔为2厘米(0.78英寸).

引言

论文正文,图表和图形均需用英文撰写.

请自己保留一份原稿.当接收到论文的时候,即视为作者授予我们在特定的书籍和期刊中使用该论文的版权.如果作者使用了从别的出版物获取的表格和图形,则必须从该出版商处获得使用该材料的版权.

强调某个词或短语的时候使用斜体字.除了章节标题外(详见标题说明),不要使用黑体字或大写字母.

正文组织

章节标题:章节标题为黑体字,首字母大写,其余字母小写.二级标题紧随其后(像该段落的副标题).

页码:不要标注论文页码.

表格:表格(标注为表格1,表格2,等)应以正文形式出现,但应避免与正文混淆.每个表格上面需有一个描述性的标题.表格中的单位需使用方括号[meV].如果没有方括号,则使用大括号{meV}或标准括弧(meV).

特殊符号:例如,α γ μ Ω () ≥ ± ● Γ {110}应该为Times New Roman或Arial字体,在图形和表格中出现时也应为上述字体.

宏指令:不要在图形和表格中使用任何宏指令.(我们无法在我们的系统中进行转换).

语言:正文,图形和图表必须为英文.

图形:图形(标注为图形1,图形2等)应为正文的一部分,标题和正文之间留出一定的距离.标题应该独立,并被放置在图形的下方或旁边.一般情况下,只接受原始图和照片复制,如果是高质量的影印版,也可接受.将图形插入征文时需格外谨慎.网目调图像需要进行去网处理,为了达到最佳的效果,图形的像素应为300dpi.

一般情况下,所有图形将被转为黑白版本.作者应在作者清单中标注是否需要彩色印刷,并提前支付所需费用.

方程式:方程式(标注为Eq 1, Eq 2等)应缩进5毫米.方程式之上需空出一行,方程式之下需空出一行.方程式需依次排序,序号需标注在正文右侧的圆括号中.方程式需加标点符号,标点出现在方程式之后,序号之前.例如:

c2 等于 a2 + b2.

(1)

参考文献:

参考文献以方括号[1]形式在论文中引用.(如果不能使用方括号,使用斜杠亦可,例如/2/,)两个或更多的文献可以放在一个方括号中,如[3,4].文献资料需按正文中被引用的次序进行标序,并在论文的结尾部分"参考文献"的标题下列出,请参见下面的例子.

总结:

如果您遵照了上述说明,您的论文则符合出版商的要求,从而避免在出版过程中出现任何问题.